Hard Wearing Epoxy Resin Flooring Systems to Suit Every Situation and Budget:

EPOXY RESIN PRIMER COATS, DUSTPROOF COATINGS AND COLOURED SEAL COATS:

Sealer (Dust Proofing) Coatings are intended for use in Very Light Duty situations. Usually applied by Roller in 2 Coats to a Typical System Finish of around 150 microns.

WATER BASED EPOXY RESIN FLOOR COATINGS:

These Epoxy Resin Coatings are designed for use in Light Duty areas. Again these are mainly applied by Roller in 2 Coats to a Typical Thickness of 300 microns:

SLIP REDUCING EPOXY RESIN SAFETY SYSTEMS:

Slip Reducing Epoxy Resin Coatings are being considered more often than ever by Companies wishing to comply with Work Place Health and Safety Issues and Requirements.

EPOXY RESIN HIGH BUILD COATING SOLVENT FREE COLOURED FINISH:

High Build Epoxy Floor Coatings suit most of today's Workplace Situations and is specifically designed for Medium Duty Environments. It's traditionally applied by Squeegee and Roller in a Typical Thickness of up to 1000 microns.

EPOXY RESIN / POLYURETHANE RESIN - SELF SMOOTHING 2-3mm COLOURED FINISH:

Also Known as a Flow Coat of Self Levelling Coating these Systems are Intended for use in Medium to Heavy Duty Environments. Applied with Notched Trowels and Squeegees to a Thickness of 2mm to 3mm and Spike Rolled for the Final Finish.